Art Table and Paper Roll: Set Up a Kids' Craft Station

By Guidecraft | Premium Kids' Furniture & Educational Preschool | Published: 2026-11-03

Category: Reseñas de productos

A practical, step-by-step guide to setting up a kids' art table with a paper roll, from unboxing and placement to loading paper and creating a tidy, creative station.

Quick answer

Set up the art table on a level floor near an outlet, load the paper roll so the sheet feeds over the top, and stock only the supplies your child can use independently. Check the table for wobble before the first drawing session.

Why placement matters more than the table itself

A paper roll table invites kids to pull, cut, and draw, so it needs clearance on the feed side and a stable floor. Placing it against a wall with the roll facing out keeps the paper from being pulled sideways, and keeping it away from heavy traffic reduces accidental bumps.

If the table will sit on a rug, check that the legs do not sink or rock. A hard, level surface is easier to keep clean and safer for toddlers who lean on the table while drawing.

What to keep within reach, and what to store higher

A kids' craft station works best when children can reach paper, crayons, and a trash bin without climbing. Keep refill rolls and messy supplies such as paint or glue on a higher shelf or in a closed bin, and rotate them in only when you can supervise.

The Martha Stewart Kids' Art Table and Paper Roll includes storage solutions and a functional work space, so use those compartments for everyday tools rather than piling supplies on the tabletop.

7 steps to set up a paper roll art table

Clear and level the floor: Choose a spot with at least two feet of open space on the paper-feed side and a level, hard floor. Remove rugs or mats that can bunch under the legs. Check for wobble by pressing gently on opposite corners before you load any paper.
Unbox and inspect the table: Lay out all parts and compare them with the assembly instructions. Tighten every bolt finger-tight first, then finish with the tool provided. Do not fully tighten one side before the others are started; that is the most common cause of a twisted frame.
Attach the paper roll holder: Mount the holder on the side or back of the table as directed, with the roll spindle horizontal and the paper feeding over the top toward the work surface. Spin the roll by hand before threading paper; it should turn freely without rubbing the table.
Load and thread the paper: Slide the roll onto the spindle, pull a sheet over the tabletop, and secure the end under the table edge or with tape. Trim the first sheet square so later tears are even. Leave a short tail hanging so your child can reach it without climbing.
Set up the stool or seating: Place a stool or chair so your child's feet rest flat and elbows sit comfortably at table height. For toddlers, check that the seat does not tip when they lean forward. A stool that slides easily on a hard floor may need felt pads or a non-slip mat.
Stock the station for independence: Fill the table's storage compartments with crayons, markers, and paper scraps. Put a small trash bin beside the table and keep refill rolls within adult reach. Keep only supplies your child can use without help; store paint and glue separately.
Run a first-session safety check: Before your child uses the table, press on the paper roll holder, tug the paper gently, and check that no bolts or screws protrude. Show your child how to tear the paper along the edge. Recheck the bolts after the first week of use, since new furniture often settles.

Product facts

Martha Stewart Kids' Art Table and Paper Roll: The table is part of the Martha Stewart Crafting Kids' Collection by Guidecraft, which includes storage solutions, functional work spaces, and places to display children's art. That built-in storage and display space lets you set up a self-serve craft station without adding separate bins or shelves.
Martha Stewart Kids' Art Table and Paper Roll